# French Terry or Fleece for Your Hoodies?
By Hoodie Manufacturing, updated November 16, 2026, 15 minute read

## Short answer
French terry and fleece start as the same knit. French terry keeps the loops on the inside as they come off the machine, so it is smooth, breathable and drapes cleanly. Fleece has those loops brushed into a soft pile, so it is warmer, thicker and holds a boxy shape. Choose fleece for cold weather and heavyweight hoodies, and French terry for year round pieces, garment dyed ranges and warm markets.

## What is the difference between French terry and fleece?

The difference is one finishing step. Both fabrics are knitted on the same machines from the same yarns, with a smooth face on the outside and a layer of soft loops on the inside. French terry leaves those loops alone. Fleece runs them under wire brushes that tear the loops open and raise the fibers into a fuzzy pile.

Everything a customer notices follows from that step. Brushing traps air, so fleece is warmer and feels thicker in the hand. Leaving the loops intact keeps the fabric flatter, more breathable and better at absorbing moisture, so French terry feels lighter on the body even at the same weight on the scale.

Turn any hoodie inside out and you can tell which one you are holding. Rows of tiny loops mean French terry. A soft, even fuzz with no visible loops means fleece.

| Property | French terry | Fleece |
| --- | --- | --- |
| Inside surface | Unbrushed loops | Brushed, fuzzy pile |
| Warmth at the same weight | Moderate | Higher |
| Breathability | Higher | Lower |
| Hand feel | Smooth and dry | Plush and soft |
| Drape | Falls close to the body | Stands away, holds shape |
| Thickness at the same weight | Thinner | Thicker |
| Lint on first wears | Very little | Some, from the brushed side |
| Best season | Spring to autumn, indoor wear | Autumn and winter |
| Garment dye and washes | Very well suited | Possible, inside can mat |
| Typical use | Year round hoodies, joggers, shorts | Winter and heavyweight hoodies |

## How is each fabric made?

Both are weft knits made on circular machines. The classic construction uses three yarns in every course. A fine face yarn forms the smooth outside. A second, thicker yarn is laid in on the back without being knitted into stitches, so it floats across in loops. A third yarn, called the binding or tie in yarn, locks those loops to the face. Mills call this three end or three thread fleece, whether or not it is brushed afterwards.

A simpler version uses two yarns, with the loop yarn tied in directly by the face. It is lighter and more elastic, and it is where most fabric under about 280 gsm comes from. When someone says two end terry, this is what they mean.

After knitting, the fabric is dyed, usually on the roll, then dried and finished. This is where the paths split. French terry goes straight to compacting, a process that pre shrinks the fabric and sets its width. Fleece first passes through a napping machine. Rollers covered in fine wire hooks turn against the back of the fabric and pull fibers out of the loop yarn until the loops disappear into a layer of raised fiber. The number of passes decides how deep and soft the pile becomes.

Brushing changes the fabric in three ways that matter for production. It makes the cloth thicker without making it heavier. It pulls the width in slightly, so the mill has to plan for it. And because fibers are being torn, it takes a little strength out of the loop yarn, which is why brushed fabric is always made with a loop yarn sturdy enough to survive the process.

## Which one is warmer?

Fleece is warmer than French terry of the same weight. Still air is what insulates, and a brushed pile holds much more of it against the body than a row of loops does. That is the whole reason brushing was invented.

The gap is easy to feel. A 320 gsm fleece hoodie is comfortable outdoors on a cold autumn day. A 320 gsm French terry hoodie in the same cut feels cooler and is the one people keep on indoors without overheating.

Weight can close the gap. A heavy French terry at 400 gsm is a warm garment, and it is what many premium brands use when they want warmth without the fuzzy inside. If your customers live somewhere with real winters and wear the hoodie as an outer layer, fleece is the direct route. If they wear it under a jacket or in heated rooms, terry is usually the better experience.

## Which one breathes better in warm weather?

French terry. The loops lift the fabric slightly off the skin and leave channels for air to move, and cotton loops absorb sweat and spread it out so it can evaporate. This is the same idea as a bath towel, which is where the word terry comes from, only on a much finer scale.

Brushed fleece does the opposite on purpose. The pile sits flat against the skin and holds warm, moist air in place. That is pleasant at five degrees and uncomfortable at twenty five.

For brands that sell in warm climates, such as the southern United States, the Gulf, Australia or Southeast Asia, French terry is the default, usually between 240 and 300 gsm. The same goes for anything meant for training or travel. Brands in northern Europe and Canada often carry both, with terry for the spring drop and fleece for autumn.

## How do the weights compare?

Both fabrics are sold by weight in grams per square meter, and both cover almost the same range. What differs is where each is most at home.

| Weight | French terry | Fleece |
| --- | --- | --- |
| 240 to 280 gsm | Common. Summer hoodies, joggers, shorts | Less common. Light sweatshirts |
| 300 to 340 gsm | Common. Year round hoodies and crewnecks | The everyday hoodie weight |
| 360 to 400 gsm | Premium, dense, smooth | Premium core hoodies, oversized fits |
| 420 to 500 gsm | Specialist, very structured | Heavyweight streetwear |

One point confuses buyers. At the same weight, fleece looks and feels heavier than terry, because brushing adds thickness. If you compare a 340 gsm fleece with a 340 gsm terry on a table, most people will guess the fleece is the heavier fabric. So when you move a style from one fabric to the other and want it to feel similar, expect to go up a step in weight for terry or down a step for fleece.

Weight has its own trade offs in warmth, drape, print and freight cost. They are covered in detail in the [hoodie GSM guide](https://hoodiemanufacturing.com/guides/hoodie-gsm-guide/), and the same rules apply to both fabrics.

## How does each feel when new and after a year of washing?

New fleece is the softest thing in the shop. The freshly brushed pile is at its fullest, and it is what makes a customer say yes in a fitting room. New French terry is smooth and a little cooler to the touch, with a dry, clean feel that some people prefer from the start and others warm to over time.

The two age differently. The pile inside a fleece hoodie slowly compresses and mats with washing and wear, especially at the elbows and under the arms. A well made fleece stays comfortable for years, but it never again feels the way it did on the first day. French terry changes much less. The loops soften, the fabric relaxes, and many customers find it more comfortable after twenty washes than when it was new.

This matters for the promise you make. If your brand sells on first touch softness, fleece wins the first impression. If you sell on the idea of a piece that gets better with age, French terry is the more honest fabric for that story.

## Which fabric pills, sheds or shrinks more?

Shedding is a fleece issue. Brushing leaves loose fiber in the pile, and during the first few wears some of it transfers to whatever is worn underneath. A light colored fleece worn over a black tee will leave lint. It fades after the first washes. Good mills reduce it by shearing and cleaning the pile after brushing, and we check for it on fabric before cutting. French terry sheds very little because nothing was torn loose in the first place.

Pilling on the outside is a different matter and has little to do with terry or fleece. Pills form on the face, and the face of both fabrics is the same plain knit. What decides pilling is the yarn. Combed, ring spun cotton with long fibers resists it. Short, carded fibers pill sooner. Polyester in the face yarn makes pills more visible, because the strong synthetic fibers hold on to the little balls that pure cotton would shed.

Shrinkage is also about cotton and finishing more than about the construction. Any cotton knit wants to shrink a few percent in its first wash, mostly in length. Both fabrics are compacted at the mill to take most of that out, and the fabric is tested before cutting so the pattern can allow for what remains. French terry tends to be slightly more stable in width. Fleece tends to hold its length a little better. Neither difference is large enough to choose a fabric by.

## Which one prints and embroiders better?

For most decoration there is no real difference, because print and embroidery go on the face and the two faces are alike. Screen printing, puff print and embroidery all work well on both.

Three details are worth knowing.

- Direct to garment printing. DTG ink needs a smooth, tight, high cotton face. Terry and fleece can both provide it, but lighter French terry often has the finer face yarn and gives the sharper result.

- Heavy fleece under a press. Thick, lofty fabric compresses under the screen or heat press. Print height and curing are set for the fabric, which is why puff print is always approved on the real fabric and not on a substitute.

- Embroidery on light terry. Dense stitching on a light, stretchy terry can pucker. A stabilizer behind the fabric solves it, and a soft cover over the back stops the stitching rubbing on skin, which matters more on terry because there is no pile to cushion it.

If decoration is central to your product, tell us the artwork before you settle the fabric. The method and the fabric are better chosen together.

## Which is better for garment dye, acid wash and vintage finishes?

French terry is the first choice for anything that is dyed or washed after sewing. Garment dyeing, pigment dyeing, acid wash and enzyme wash all tumble the finished hoodie in a machine for a long time. Unbrushed loops come through that treatment looking the same as they went in.

A brushed pile does not always. Long wet processing can mat the inside of a fleece hoodie and pull more loose fiber out of it, so the garment comes out less plush than the fabric it was cut from. It can be done, and plenty of washed fleece hoodies are sold, but the result has to be tested on a sample and the fabric chosen with the wash in mind.

This is the main reason the vintage, sun faded look is so closely tied to French terry. If that look is the heart of your range, start there.

## How does the choice change fit and drape?

French terry is the more fluid fabric. It hangs from the shoulder and follows the body, which flatters regular and slim fits and gives relaxed cuts an easy, slouchy line. Hems and cuffs sit flat, and the hood collapses softly when it is down.

Fleece has more body. The pile acts like a thin layer of padding that pushes the fabric away from the wearer, so the garment keeps its outline. Shoulders stay square, the side seam hangs straight and the hood stands up on its own. This is why almost every boxy streetwear hoodie is cut from fleece, usually a heavy one.

The same pattern therefore gives two different garments. A brand that samples an oversized hoodie in terry and finds it limp does not have a pattern problem. It has chosen a fabric that drapes when the design wanted one that stands. When you brief [custom hoodie production](https://hoodiemanufacturing.com/custom-hoodie-manufacturer/), describe the silhouette you want as well as the fabric, so the two can be matched on the sample.

## Does one cost more to produce?

Fleece carries one extra process, so for the same yarn and weight it costs slightly more at the mill. In a finished hoodie the difference is small and is usually lost among larger factors.

The things that move the price far more are these.

- Weight. Fabric is bought by the kilogram. A 450 gsm hoodie uses far more cotton than a 280 gsm one, whichever construction it is.

- Yarn. Combed ring spun cotton costs more than carded or open end yarn. Organic cotton costs more again.

- Color. A stock shade is cheaper and available in smaller quantities than a shade dyed to your reference.

- Finishing. Garment dye and washes add cost per piece and are more common on terry, so a washed terry hoodie can cost more than a plain fleece one.

In practice, brands rarely choose between terry and fleece on price. They choose on season, feel and look, and then manage cost through weight and color.

## Which fabric should you choose for each product?

| Product | Usual choice | Why |
| --- | --- | --- |
| Winter pullover hoodie | Fleece, 320 to 400 gsm | Warmth and a soft first touch |
| Oversized streetwear hoodie | Fleece, 400 gsm and above | Holds a boxy shape |
| Year round or spring hoodie | French terry, 280 to 340 gsm | Breathes, layers well |
| Garment dyed or washed hoodie | French terry, 300 to 380 gsm | Comes through washing unchanged |
| Zip up hoodie | Either, 300 to 360 gsm | Worn open and closed, midweight works best |
| Crewneck sweatshirt | Either | Fleece for classic warmth, terry for a cleaner drape |
| Joggers and sweatpants | French terry, or lighter fleece | Less heat when sitting, less bagging at the knee |
| Shorts | French terry, 240 to 300 gsm | Summer product |
| Gym and training wear | French terry | Absorbs sweat, dries faster |
| Kids hoodies | Fleece for winter, terry otherwise | Softness matters, so does overheating |
| Merch and promotional hoodies | Fleece, 280 to 340 gsm | Feels generous at a controlled cost |

## Can one collection use both?

Yes, and many do. The usual pattern is a core fleece hoodie for the cold months and a French terry version of the same design for spring and summer. Customers who like the fit buy it twice.

Two things need care when you mix them. The first is color. A shade dyed on fleece and the same recipe on terry will not look identical, because the two surfaces reflect light differently and take up dye at slightly different rates. If the pieces will be worn together, for example a fleece hoodie over terry shorts, have both lab dips approved side by side.

The second is the set. A tracksuit looks best when top and bottom come from one fabric and one dye lot. If you want fleece on top and terry below for comfort, treat them as deliberately different pieces, in tone as well as texture, and not as a match that nearly worked.

## How should you specify the fabric in a tech pack?

Writing French terry or fleece on its own is not enough for a mill to reproduce what you have in mind. A complete fabric line names six things.

- Construction. French terry or brushed fleece, and three end or two end if you know it.

- Weight. In gsm, with a tolerance. Five percent either way is normal.

- Fiber content. For example full cotton, or cotton with a stated share of polyester.

- Yarn. Combed ring spun if you want a smooth, pill resistant face.

- Color. A color system reference or a physical swatch.

- Finish. Any peach finish, enzyme wash, garment dye or wash that follows.

If you cannot fill these in, send a garment whose fabric you like. We weigh it, identify the construction and yarn, and match it as closely as the mills allow. That is how most first briefs work, and the sample then confirms the match.

## What do loopback, brushed back and the other names mean?

The trade uses several names for the same two fabrics, and they change from country to country.

| Name | What it is |
| --- | --- |
| French terry | Unbrushed loops inside. The usual American and international name |
| Loopback, looped back | The same fabric. The usual British name |
| Terry fleece, unbrushed fleece | French terry again, named by mills that call the whole family fleece |
| Fleece, brushed fleece, brushed back | Loops brushed into a pile |
| Sweatshirt fleece, cotton fleece | Brushed fleece in cotton or a cotton blend |
| Three end, three thread | Knitted with a separate binding yarn. Can be terry or fleece |
| Two end, two thread | Lighter construction without the binding yarn |
| Polar fleece, microfleece | A different fabric. All polyester, brushed on both sides, used for outdoor jackets |
| Sherpa | A long pile polyester knit that imitates sheepskin, used as a lining |
| Terry cloth, toweling | Woven or knitted with large loops, for towels and robes. Not a hoodie fabric |

The pair that causes the most trouble is fleece and polar fleece. When a hoodie brand says fleece it almost always means brushed cotton fleece. When an outdoor brand says it, it means the polyester fabric. If you are sourcing from a new supplier, confirm the fiber content in writing.

## How can you tell them apart on a sample?

Four quick checks settle it without any equipment.

- Look inside. Visible loops are terry. A uniform fuzz is fleece.

- Pinch the thickness. For a similar weight, fleece feels clearly thicker between the fingers.

- Hold it to the light. Light terry lets a little light through between the loops. Fleece of the same weight looks solid.

- Rub the inside on dark cloth. New fleece leaves a few fibers. Terry leaves almost none.

To check quality as well as type, stretch the fabric across the width and let go. A good knit of either kind springs back at once. Then scratch the face lightly with a fingernail. If fibers lift easily, the yarn is short and the hoodie will pill.

## What mistakes do brands make when choosing between them?

The same handful of mistakes come up in first orders.

- Choosing by the name. French terry sounds more refined and fleece sounds warmer, so the fabric is picked from a word and not from a swatch. Always handle both at the weight you plan to use.

- Using terry for a boxy fit. The pattern is blamed when the fabric is the cause. Structured silhouettes want fleece or a very heavy terry.

- Using heavy fleece for joggers. What feels premium in a hoodie feels hot and stiff in pants, and the knees bag sooner.

- Washing fleece without testing. A garment dye or acid wash is ordered on brushed fabric and the inside comes back matted.

- Selling fleece into a warm market. The hoodie is admired and then not worn. Returns and slow reorders follow.

- Matching weights across fabrics. A terry version is ordered at the same gsm as the fleece and feels thin by comparison.

- Ignoring the rib. Cuffs and hem are knitted separately. A rib that is too light makes either fabric look cheap.

## What else do brands ask about terry and fleece?

### Is French terry the same as loopback?

Yes. Loopback is the name used in the United Kingdom for the fabric the rest of the trade calls French terry.

### Is French terry better quality than fleece?

No. They are two finishes of the same knit. Quality comes from the yarn, the density of the knit and the finishing, and either fabric can be made well or badly.

### Is fleece always polyester?

No. Hoodie fleece is normally cotton or mostly cotton. Polar fleece, used for outdoor layers, is the polyester fabric.

### Can French terry be brushed later?

Yes, at the mill. Fleece is French terry that has been brushed. It cannot be undone, and it is done on the roll, not on a sewn garment.

### Which is better for an all season hoodie?

French terry between 300 and 340 gsm is the safest single choice for a hoodie that has to work most of the year.

### Which is better for a heavyweight hoodie?

Fleece. From 400 gsm upward it gives the dense, structured feel customers expect from [heavyweight hoodies](https://hoodiemanufacturing.com/heavyweight-hoodie-manufacturer/). Heavy French terry is the alternative when you want that weight with a smooth inside.

### Do both come in organic cotton?

Yes. Both constructions are available in certified organic cotton and in blends with recycled fiber.

### Does fleece stay soft after washing?

It stays comfortable, but the pile compresses over time. Washing inside out in cool water and avoiding a hot dryer slows this down.

### Which shrinks less?

There is little between them. Both are compacted before cutting, and the remaining shrinkage is allowed for in the pattern.

### Can I get the same color in both fabrics?

Close, not identical. Each fabric needs its own lab dip, and the two should be approved side by side if they will be sold together.

## How do you make the final decision?

Three questions settle most cases.

First, where and when will the hoodie be worn? Cold weather and outdoor wear point to fleece. Warm climates, indoor wear and layering point to French terry.

Second, what shape do you want? A hoodie that stands away from the body and keeps a square outline wants fleece. One that falls and moves with the wearer wants terry.

Third, what happens to it after sewing? If the answer is garment dye or a wash, start with terry. If it is print or embroidery on a piece dyed fabric, either will do.

If the answers pull in different directions, sample both. Two samples in the same pattern, one in each fabric, cost far less than a production run in the wrong one, and the difference is obvious the moment you put them on. Send us the style you have in mind and the market you sell in, and we will suggest a fabric and weight for each sample. Terry or fleece, we knit, dye and sew it for your order, and the hand feel of the finished hoodie is our best argument.

## Where to go next
- [Custom hoodie manufacturing](https://hoodiemanufacturing.com/custom-hoodie-manufacturer/)Have either fabric cut and sewn to your own pattern, with a sample in 14 days.

- [Hoodie fabrics and weights](https://hoodiemanufacturing.com/fabrics/)Every construction, weight and finish we cut hoodies from.

- [What GSM is best for a hoodie?](https://hoodiemanufacturing.com/guides/hoodie-gsm-guide/)Once you have chosen the fabric, choose its weight.

- [Heavyweight hoodie manufacturing](https://hoodiemanufacturing.com/heavyweight-hoodie-manufacturer/)Dense fleece from 400 gsm for structured, premium hoodies.

## Ready to brief your production?
Send the style, fabric and quantity. You get a written quotation and a first sample in 14 days.

[Get a quote](https://hoodiemanufacturing.com/get-a-quote/)
